Some power aspects of the process of chipless division of wood with disc knives
https://doi.org/10.21266/2079-4304.2023.246.379-394
Abstract
The technological process in woodworking associated with the deformation of the processing of soft hardwood is progressive. Several specific tasks have been carried out to determine this. By modeling the physical processes of deformation in soft deciduous wood, certain features and conditions are taken into account, which is most fully reflected by mathematical models. Through this tool, a list of rational modes is proposed for cutting as a result of analytical processing of the contact interaction of the tool with wood in a specialized computer environment. The most productive of the technological operations were named, and technological maps were prepared, where each basic deforming treatment of soft-deciduous wood for mechanically processed wood is prescribed. With the revision of the research methodology, a new perspective for the application of the listed technological processes was determined – economical and ergonomic. With the help of subsequent analysis, the progressiveness of new developments was determined, which make it possible to carry out deformation of the processing of soft deciduous wood as efficiently as possible.
About the Authors
V. P. Ivanovskiy
Voronezh State Forestry University named after G.F. Morozov
Russian Federation
Russian Federation
IVANOVSKY Vladimir P. – PhD (Technical), Associate professor of the Department Wood Science
394087, ул. Тимирязева, д. 8, г. Воронеж
A. E. Verkholomov
Voronezh State Forestry University named after G.F. Morozova
Russian Federation
Russian Federation
VERKHOLOMOV Andrey E. – Student
394087. Timiryazev str. 8. Voronezh
References
1. Brischke Ch., Gobakken L.R. Wood materials science and engineering. Protection of wooden infrastructure and massive wooden buildings. 2015. 325 р. DOI: 10.1080 / 17480272.2020.1799242.
2. Rahayu, Isti Darmavan, Wayan Zaini, Lukmanul and Prikhatini Esti. Characteristics of fast-growing wood impregnated with nanoparticles. Journal of Forestry Research, 2019, pp. 1–9.
3. Sadrtdinov A., Safin R., Timerbayev N., Zyatdinova D., Saprykina N. Development of equipment for solid organic waste disposal and optimization of its operation IOP conference series: Materials Science and Engineering, 2016. 142 р. DOI: 10.1088 / 1757-899X / 142/1/012095.
4. Safin R.R., Khasanshin R.R., Timerbayeva A.L., Safina A.V. Investigation of physical and energy properties of fuel pellets based on thermomodified wood raw materials. Journal of Engineering Physics and Thermophysics, 2015, pp. 958–961. DOI: 10.1007 / s10891-015-1270-y.
5. Sviridov L.T. Modern processes and equipment in woodworking: monograph. – Voronezh: Voronezh Central Research Institute – branch of the Federal State University «REA» of the Ministry of Energy of Russia, 2011. 363 р.
6. Physical and mechanical properties of Accoya wood. The official website of the company Accoya. URL: https://www.accoya.com/why-accoya/benefits/
7. Physical and mechanical properties of keboni wood. The official website of the Kebony company. URL: http://kebony.com/ru/products / – title from the screen. Fomin A.V. Oscillatory motion of a complex milling cutter under the action of cutting force. Russian engineering surveys, 2013, pp. 57–60.
8. Zhu K., Zhang H., Likong G., Jian Li., Haigan V., Jungi Wang. Transparent wood that protects against infrared heat and ultraviolet light due to the inclusion of modified tin oxide nanoparticles doped with antimony. Science and technology of composites, 2019, vol. 172, pp. 43–48. URL: https://doi.org/10.1016/j.compscitech.2019.01.005.
9. Shamaev V.A., Parinov D.A. and Polilov, A. Investigation of sliding bearings made of modified wood for highly loaded friction units. Journal of echanical Engineering and Reliability, 2018, pp. 168–172. DOI: 10.3103 / S1052618818020115.
Review
For citations:
Ivanovskiy V.P., Verkholomov A.E. Some power aspects of the process of chipless division of wood with disc knives. Izvestia Sankt-Peterburgskoj lesotehniceskoj akademii. 2023;(246):379-394. (In Russ.) https://doi.org/10.21266/2079-4304.2023.246.379-394
Views:
57
Email this article 