Identification of comparability indicators of the pulp mill discharged treated effluents quality with the technological parameters of the production nature intensity

In accordance with the changes in environmental legislation the issue of minimizing the nature intensity of sulfate-pulp production, which affects the ecosystem of the lake, is inextricably linked with the study of the transformation and transformation of pollutants in the water, taking into account the hydrological characteristics of the reservoir. The natural intensity of pulp production is determined by the quantity and quality of the raw materials used – wood, wood chips, chemical reagents, water; the technological process of production of pulp, paper, cardboard, as well as by-products such as turpentine, tallow oil and efficiency and applied environmental technologies for the management of discharges, emissions and waste of production and consumption. The tasks of reducing the negative impact of sulfatecellulose production on the aquatic ecosystem were solved. Together with the laboratory of the environmental protection department of the pulp mill, a number of laboratory studies of treated and untreated waste water after cooking of different grades of pulp were carried out in the summer-autumn period of 2020 in order to implement the procedure for rationing waste water of the pulp and paper mill according to the criteria of regional environmental technology intensity. A model is presented for studying the transformation of pollutants in treated and untreated wastewater from sulfate-pulp production at various dilutions with natural water. Target and representative indicators of alkaline-containing wastewater are presented, taking into account the best available technologies (BAT) in the field of pulp production. The parameters of the biochemical oxidation kinetics were studied at five water dilution multiplicities simulating the initial and main dilution zones. The main characteristics of the production and territorial complex were measured within the framework of the tasks of environmental rationing.

1. Bazyakina N.A. Calculation of the oxygen consumption rate constant when determining the BOD of a waste liquid. Sanitary equipment, 1933, no. 2, pp. 17–24. (In Russ.)

2. Bogolitsyn K.G., Soboleva T. V., Gusakova M.A., Pochtovalova A.S., Lichutina T.F. Scientific bases of ecological and analytical control of industrial wastewater of the pulp and paper mill. Yekaterinburg, 2010, pp. 60–108. (In Russ.)

3. Camp T.K. Water and it is impurity. Boston, Massachusetts, 1963. 355 c.

4. Druzhinin N.I., Shishkin A.I. Mathematical modeling and forecasting of land surface water pollution. L.: Gidrometeoizdat, 1989. 329 p. (In Russ.)

5. Granberg К. The impact of effluents of Pitkäranta pulp mill on the water quality of Lake Ladoga: a model study, 1996, no. 322(1-3), pp. 159–166.

6. Gray N.F. Water Technology: An Introduction for Environmental Scientists and Engineers (2nd Edition), Elsevier Science & Technology Books, Amsterdam, The Netherlands, 2005. 623 p.

7. Gusakova M.A., Brovko O.S., Konstantinova S.A., Khristoforova G.I. Optimization of the system of control and monitoring of pollutants in the effluents of the pulp and paper industry. Best available technologies. Determination of marker substances in various industries. Collection of articles 3. M.: Pero, 2015, pp. 35–66. (In Russ.)

8. Hewitt J., Hunter J.V. Lockwood D. A multi order approach to BOD kinetics. Water Recourses, 1979, no. 13, pp. 325–329.

9. Lichutina T.F., Bogolitsyn K.G., Gusakova M. A. Complex assessment of the negative impact on the environment of pulp and paper mill enterprises in accordance with the technological standards of the European Community. Pulp. Paper. Cardboard, 2011, no. 8, pp. 52–62. (In Russ.)

10. Lin S.D. Water and Wastewater Calculations Manual (2nd Edition), McGraw-Hill Companies, New York, USA, 2007. 913 р.

11. Russell D.L. Practical Wastewater Treatment. David L. Russell. – Hoboken, N.J.: Wiley-Interscience, 2006, XIV. 271 p.

12. Shishkin A. Chusov A., Stroganova M., Kushnerov A. Combined technology of field research and modeling in the development of the rationing method of pulp mill wastewater in the conditions of deep water outlets. Journal of Physics: Conference Series, 2020, p. 1614.

13. Shishkin A.I., Stroganova M.S., Antonov I.V. Load rationing in the discharge of CBP effluents on the transboundary section of the Vuoksa river. Bulletin of SPbSUITD. Series 1: Natural and Technical Sciences, 2019, no. 2, pp. 88–93. (In Russ.)

14. Shishkin A.I., Stroganova M.S., Antonov I.V., Adylova A.Zh. Increasing the level of environmental friendliness of the cellulose natural production complex to ensure the norms of permissible discharges. Izvestia Sankt-Peterburgskoj Lesotehniceskoj Akademii, 2020, is, 232, pp. 208–232. (In Russ.)

15. Stroganova M.S., Shishkin A.I. Efficiency of treatment facilities assessment of the pulp mill. Dialogue of Cultures: Proceedings of the XIII Interuniversity Scientific and Practical Conference with International Participation in 2020 – in English. St. Petersburg: SPb HSTE SUITD, 2020, part I, pp. 93–97.

16. Vavilin V.A. On models of biochemical oxidation of organic substances in water bodies. Water Resources, 1975, no. 4, pp. 160–164. (In Russ.)